FLEETWOOD® Series 3200-T Narrow Style Thermal Frame Hinged Doors are a superb choice for property owners who want new hinged doors that boast superior quality and elegantly narrow sightlines. It is a superior choice boasting unsurpassed quality with structural strength and an eye-catchingly beautiful design.
FLEETWOOD® Series 3200-T Narrow Style Thermal Frame Hinged Doors are available at Westside Door, a FLEETWOOD® Authorized Dealer serving the West Los Angeles, Brentwood, Bel Air, Santa Monica, Malibu, Pacific Palisades, South Bay, Hermosa Beach, Manhattan Beach, Redondo Beach, Rancho Palos Verdes, Palos Verdes, Orange County, Laguna Beach, Irvine, Huntington Beach, Newport Beach and surrounding Southern California.
Elegance, Beauty and Strength: Fleetwood Series 3200-T Narrow Style Thermal Frame Hinged Doors
FLEETWOOD® Series 3200-T Narrow Style Thermal Frame Hinged Doors are available at Westside Door – The Best Little Doorhouse In Town® Since 1971 – Call: 310-478-0311
Strength & Beauty
Low profile, adjustable stainless hinges (AHT) are complimentary of the slim extrusions, yet strong enough to handle a 40″ wide by 108″ tall panel.
In order to align with modern architecture, frames are butt joined instead of mitered. In order to achieve this feature and maintain strength, we needed an exceptional corner key. The wall thickness exceeds 5/16″ in most locations and penetrates 4-1/4″.
Aluminum is thermally stable in that it does not swell or shrink when the temperature or humidity levels change. Very little energy is lost through the frame material but in the case of wood and vinyl, energy is lost through the frame and vent seams after years of expansion and contraction.
Modern Thermal Design:
For over 10 years, FLEETWOOD® has incorporated polyamide thermal struts on all new products, resulting in a more attractive design and innovative shapes.
Crisp, Linear Shapes:
FLEETWOOD® design focus is the opposite of mass production. A prime example is the sharp edges and crisp lines created by a balance of hand tooling, automation, and dedicated machining.
FLEETWOOD® hinged doors come standard with FSB stainless steel levers for an uncompromising, sleek design. A self-latching lock (2-PT) is complimented by a thumb turn deadbolt with an optional keyed cylinder.
Steel Door Look:
FLEETWOOD® offers a simulated divided lite which resembles a classic beveled design of a steel door, allowing the beauty of steel without the immense cost or limitations of steel.
Perhaps the most intriguing feature of FLEETWOOD® Series 3200-T Narrow Style Thermal Frame Hinged Doors is its ability to achieve a slim 4″ metal reveal at the jamb after a designated portion is buried in the wall.
High Efficiency Glass:
Modern glazing from FLEETWOOD® coupled with increasingly efficient insulation techniques allows a minimalist design with huge glass that does not compromise energy consumption.
FLEETWOOD® offers hundreds of modern glass options. Hinged door products are designed to accept high-performance, 1” or 1-1/2” insulated glass.
Thermal Break Technology:
FLEETWOOD® products with a “T” in the series number are manufactured with thermally broken aluminum for condensation control and energy efficiency. For over 30 years, Fleetwood has designed products around this now sweeping practice and does so with extensive testing and engineering so the product maintains the look for the ultimate minimalist.
FLEETWOOD® vs. Storefront
Commercial storefront doors are not intended to resist weather. As such, water and air infiltration is expected by design. Each FLEETWOOD® hinged door has been tested for air infiltration, water infiltration and structural wind loads.
Storefront doors come with typical commercial hardware which is cumbersome to operate. The locking nob spins more than 720 degrees making it hard to tell if the door is locked or unlocked. Fleetwood doors operate with one handle that actuates the locking system (2-PT) and an attractive thumb turn that throws a heavy dead bolt.
Storefront doors have deep, hollow rails. Aside from the obvious weakness, this is a hidden disadvantage that rears its head when it rain fills these huge cavities with water. Fleetwood hinged products are web designed for strength and evacuate water immediately.
Luxury Home Hinges:
FLEETWOOD® hinges (AHT) were designed for luxury homes and come equipped with adjustment points that any “do it yourselfer” can do with simple household tools. Storefront doors offer crude methods of adjusting e.g. “jack screw” and typically require a technician to come to your home.
FLEETWOOD® Series 3200-T Narrow Style Thermal Frame Hinged Doors standard features:
- Stock Anodized Finish: Black (Class 1) or Clear (Class 1)
- 1″ Insulated Glass with Dark Bronze Spacer
- 6063 T-6 Extruded Aluminum
- Strut Thermal Barriers
- 4-1/2″ Deep Nail-on Frame
- Stainless Steel Assembly Screws
- Welded Butt Joined Corners with Bolster Key
- 1-1/2″ Height Threshold
- Aluminum Sill Pan (Non-Thermal)
- Exterior Swing
- Truth Adjustable Hinges (4) (AHT)
- Stainless Steel Escutcheon Plate & FSB Lever
- Lever Height (37-1/4″) – If operation injury is a concern, consider the Series 3900-T
- Exterior Snap-in Glazing (Square Profile)
- Exterior Keyed Lock
- Kynar 70% Paint (50% for dark colors, ex. Black)
- Class 1 Custom Anodize (Light Bronze & Medium Bronze)
Glazing: 9/16″, 1-1/4″, 1-1/2″
4-1/2″ Deep Equal Leg (Block) Frame
1/2″ Height Threshold (Minimal Weather & Energy Performance)
Side Lites & Transoms (Pending)
Steel Look SDL
Max Panel Width & Height
- Max Panel Width: 40″
- Max Frame Height: 108″(Max width & height are not necessarily available in combination)
“STEEL LOOK” SIMULATED DIVIDED LITES
FLEETWOOD® has introduced a variety of new “Steel Look” SDL options for the minimalist designer wanting to match the classic look of steel, but also wanting to avoid the cost and complications of steel manufacturing.
To learn more about FLEETWOOD WINDOWS & DOORS® products, you can reach out to Westside Door – your authorized FLEETWOOD® Dealer in West Los Angeles, Southern California. Also serving Orange County, South Bay, Beverly Hills, Malibu, West Los Angeles and all of Southern California.
Westside Door – The Best Little Doorhouse In Town® Since 1971 – Southern California Authorized FLEETWOOD® Dealer in West Los Angeles
We are located in West Los Angeles., on Sepulveda Blvd., between Pico and Olympic, one block east of the 405 Freeway.
Westside Door & Moulding
2326 South Sepulveda Blvd.
West Los Angeles, CA 90064
Phone: (310) 478-0311
Fax: (310) 478-0314