Westside Door is an Authorized FLEETWOOD WINDOWS & DOORS® Dealer serving the Orange County and Southern California area. Call us: (310) 478-0311
FLEETWOOD® Series 440-T Pivot Doors for Properties In and Around: Santa Monica | Beverly Hills 90210 | Brentwood 90049, Los Angeles | West Los Angeles 90034, 90035 |
The first of its kind, FLEETWOOD® Series 4400-T Pivot Doors break serious ground as a weather and energy rated pivot door designed for luxury residential applications. FLEETWOOD® Series 4400-T Pivot Doors marry the clean, contemporary design demanded by modern architecture with the performance required by entrance doors for elite luxury homes.
FLEETWOOD® Series 4400-T Pivot Doors are available at Westside Door, an Authorized FLEETWOOD WINDOWS & DOORS® Dealer serving West Los Angeles, Brentwood, Bel Air, Santa Monica, Malibu, Pacific Palisades, South Bay, Hermosa Beach, Manhattan Beach, Redondo Beach, Rancho Palos Verdes, Palos Verdes, Orange County, Laguna Beach, Irvine, Huntington Beach, Newport Beach and surrounding Southern California.
Westside Door Since 1971 is an Authorized FLEETWOOD WINDOWS & DOORS® Dealer in West Los Angeles. Serving Los Angeles County, Orange County, Riverside County, Inland County and all of Southern California Area.
We Welcome Home Owners, Builders, Interior Designers, Architects and General Contractors Call us: (310) 478-0311 or Email at: customer.service@westsidedoor.com
FLEETWOOD® Series 4400-T Pivot Doors – Available at Westside Door – The Best Little Doorhouse In Town® Since 1971 – Call: 310-478-0311
FLEETWOOD® Series 4400-T Pivot Doors are available at Westside Door, a FLEETWOOD WINDOWS & DOORS® Authorized Dealer serving West Los Angeles, Orange County, Southern California. Call us: 310-478-0311
FLEETWOOD® Series 4400-T Pivot Doors boast engineered weather barriers and a concealed drop seal in the bottom rail secure the interior against air and debris infiltration. The combination of the patent pending sill design and FritsJurgens In-Rail closer allows the finished floor of the home to be part of the pivot door sill. The end result is a gorgeous flow of interior floors that blurs into the outdoors.
Elite Luxury Homes in Santa Monica, Beverly Hills, Brentwood and West Los Angeles will be enhanced by this magnificent pivot door. FLEETWOOD® Series 4400-T Pivot Doors are part of the Gen4 family and are the only door in their class. Designed for posh properties, it boasts a weather rating and JUMBO sizes with a concealed In-Rail Closer. The patent pending sill design allows for a unabated flow of interior and exterior flooring.
Size Capability: 13’ wide, 15’ tall (max width and height are not necessarily available in combination)
With a patent pending sill design that allows for a unabated flow of interior and exterior flooring, the 4400-T pivot door offers ample weather tested performance. Additionally, the 4400-T available in large widths and can be combined with other panels for even larger openings. And when the hydraulic In-Rail Closer (IRC) is utilized the Series 4400-T is feasible for upper floors.
The hydraulic In-Rail Closer (IRC) allows 3 custom adjustments:
- Open 90 Degrees Speed (slows down at 80-degree point)
- Final 30 Degrees Speed
- Final 10 Degrees Latching Speed
These options are easily accessed from the underside of the bottom rail without removing the panel. FLEETWOOD® Series 4400-T Pivot Doors’ vertical lines are some of the narrowest on the market. The standard 4” stile is thinner than most and the optional 3-1/2” stile is in its own class. It is one of the only energy rated pivot doors on the market, which will improve home efficiency. With hundreds of glass choices depending on homeowner needs, there is no shortage of glazing options whether for added security, more light and energy, sound control, and more.
Elite Luxury Homes in Santa Monica, Beverly Hills, Brentwood and West Los Angeles will be enhanced by FLEETWOOD® Series 4400-T Pivot Doors.
Additional FLEETWOOD® Series 4400-T Pivot Doors Details:
Floor-Through-Door Sill:
The FLEETWOOD® 4070-T Patent Pending sill design has been engineered for the FLEETWOOD® 4400-T, making the home’s finished floor the door sill, leaving ONLY a slim slot drain. This feature is gorgeous and provides ample weather tested performance
Multi-Panel Option:
Not only is the FLEETWOOD® 4400-T available in large widths, e.g. 12′, it can also be combined with several other panels for an even larger opening. With the ‘hold open’ feature of either the In-Rail (IRC) Floor Closer, these multi-panel openings are functional and dramatic.
Upper Floor Capable:
When the hydraulic In-Rail Closer (IRC) is chosen, the FLEETWOOD® Series 4400-T is feasible for upper floors, which historically has not been possible due to limited floor depth. The pivot anchor only requires 1-¾” floor penetration.
Adjustable Closer:
Not only is the FLEETWOOD® 4400-T available in large widths, e.g. 12′, it can also be combined with several other panels for an even larger opening. With the ‘hold open’ feature of either the In-Rail (IRC) Floor Closer, these multi-panel openings are functional and dramatic.
FLEETWOOD® Series 4400-T Pivot Doors marry the clean, contemporary design demanded by modern architecture with the performance required by entrance doors for elite luxury homes.
Upper Floor Capable:
The hydraulic In-Rail Closer (IRC) allows 3 custom operation adjustments:
- Open 90 Degrees Speed (slows down at 80-degree point)
- Final 30 Degrees Speed
- Final 10 Degrees Latching Speed
- The three options are easily accessed from the underside of the bottom rail without removing the panel.
The “Little” Things
Residential Design:
In the aluminum pivot door world, only the FLEETWOOD® 4400-T was designed for elite luxury residential applications. Competing products offer modified commercial doors that fail in performance and pale when comparing fit & finish.
Minimal Panel Stop:
One of many unique traits of the FLEETWOOD® 4400-T is the beauty of the jamb and head panel stops. The stop slides into a concealed jamb groove and is attached from behind. When the stop is used in the head, the interior and exterior ends are finished with a cap.
Hidden Weather-Stripping:
During design, apt attention was given to hiding the needed weather-stripping as much as possible. The intention was for customers to only see aluminum and hardware while in a closed position.
Designed for posh properties, FLEETWOOD® Series 4400-T Pivot Doors boasts a weather rating and JUMBO sizes with a concealed In-Rail Closer.
Superior Characteristics
Slender Lines:
The vertical lines of each FLEETWOOD® Series 4400-T are some of the narrowest on the market. The standard 4” stile is thinner than most and the optional 3-1/2” stile is in its own class.
Slender Jamb:
Each jamb is offered with a nail-fin or block frame preparation for installation. The flat shelf face allows the builder to bury 1” of the jamb so the wall-to-glass dimension is a slim 3-1/2″ when using the 2-Point Locking Hardware.
Buried Drop Seal:
Regardless of the closer, each panel comes with an additional seal that is concealed within the bottom rail (PDS). Once the panel engages the jamb frame, the seal will drop into place
Large Sizes:
The sleek lines of the FLEETWOOD® Series 4400-T are clear but strength is not compromised.
Some may ask “How big can you make each panel?”
The FLEETWOOD® response is: “How big do you want it?” In most cases, the only limitations on size are dictated by the selected glass or closer.
Energy, Noise & Security
Energy Rated:
The FLEETWOOD® Series 4400-T is one of the only energy rated pivot doors on the market.
Reduced Air/Insect Infiltration:
Most pivot doors bleed air, but the FLEETWOOD® Series 4400-T comes standard with engineered weather barriers and a concealed drop seal (PDS) for the bottom rail that prevents most of the air infiltration and annoying insect entrances.
Glazing Options:
FLEETWOOD® offers the Series 4400-T in hundreds of glass choices, depending on the needs of the client. Whether the needs are security, more light, energy, sound control, tinting or custom glazing or panels, clients can choose from these thicknesses: 9/16”, 1”, 1 ¼ or 1 ½”.
Westside Door Authorized FLEETWOOD WINDOWS & DOORS® Dealer serves Santa Monica | Beverly Hills 90210 | Brentwood 90049, Los Angeles | West Los Angeles 90034, 90035 |
Santa Monica, California
Santa Monica, California FLEETWOOD WINDOWS & DOORS® Authorized Dealer Westside Door
Santa Monica is a coastal city west of downtown Los Angeles and is a popular resort town, owing to its climate, beaches, and hospitality industry. It has a diverse economy, hosting headquarters of companies such as Hulu, Activision Blizzard, Universal Music Group, Lionsgate, Illumination and The Recording Academy.
Santa Monica has emerged as the center of the Los Angeles region called Silicon Beach, and serves as the home of hundreds of venture capital funded startup companies. Santa Monica Pier is home to the Pacific Park amusement park, historic Looff Hippodrome Carousel and Santa Monica Pier Aquarium.
Beverly Hills 90210, California
Beverly Hills, California FLEETWOOD WINDOWS & DOORS® Authorized Dealer Westside Door
Beverly Hills is a city in California’s Los Angeles County. Home to many Hollywood stars, along with its renowned celebrity residents and guests, grand homes and flagship stores along Rodeo Drive, the city also boasts a multitude of unique architecture, verdant parks and gardens, gourmet food shops and specialty bars.
A notable and historic suburb of Los Angeles, it is located just southwest of the Hollywood Hills and a dozen miles northwest of downtown Los Angeles. Beverly Hills has been known primarily as an affluent location within Greater Los Angeles and is the setting of many films and shows.
Brentwood 90049, Los Angeles, California
Brentwood, California FLEETWOOD WINDOWS & DOORS® Authorized Dealer Westside Door
Brentwood is a suburban neighborhood in the Westside region of Los Angeles, California. It is at the base of the Santa Monica Mountains. Brentwood is a charming and desirable community for residents and businesses alike.
Known for its luxurious homes and celebrity residents, Brentwood properties have become some of the city’s most highly coveted real estate. There are three upscale commercial areas: Brentwood Country Mart, Barrington Plaza and the San Vicente Business District, which include restaurants, clothing stores, and other high-end retailers.
West Los Angeles 90034, 90035, California
West Los Angeles, California FLEETWOOD WINDOWS & DOORS® Authorized Dealer Westside Door
West Los Angeles is the embodiment of the pop culture image of California – palm trees, open sky and beaches. West Los Angeles offers residents an urban feel and there are a lot of bars, restaurants, coffee shops, and parks.
Thousands of citizens call the area home, typified by an urban-but-cozy feel. The area is a sought-after location because of its proximity to the coast, convenient access to the city, diverse amenities, vibrant culture, esteemed educational institutions, and pleasant climate.
To learn more about FLEETWOOD WINDOWS & DOORS® products, you can reach out to Westside Door – your authorized FLEETWOOD® Dealer in West Los Angeles, Southern California. Also serving Orange County, South Bay, Beverly Hills, Malibu, West Los Angeles and all of Southern California.
Westside Door – The Best Little Doorhouse In Town® Since 1971 – Southern California Authorized FLEETWOOD® Dealer in West Los Angeles
We are located in West Los Angeles., on Sepulveda Blvd., between Pico and Olympic, one block east of the 405 Freeway.
We’ve been specializing in doors, windows, mouldings, skylights, and hardware since 1971.
Address:
Westside Door & Moulding
2326 South Sepulveda Blvd.
West Los Angeles, CA 90064
Monday–Friday 7:00am-4:00pm
Sales
Phone: (310) 478-0311
Fax: (310) 478-0314
