To learn more about T.M. COBB® products, reach out to Westside Door – Authorized T.M. COBB® Dealer. Call us: (310) 478-0311
Made from MDF or Molded high-Density Fiberboard, T.M. COBB® Molded Doors resist shrinking, swelling, cracking and joint separation, making them a solid choice for Home Owners, Builders, Interior Designers, Architects and General Contracts looking for a solid choice in entry systems. T.M. COBB® Molded Doors boast the heft and sound-deadening properties of solid wood, which can be specified for either hollow or solid core construction and with either finger-joint or MDF stiles and rails.
Westside Door, an authorized T.M. COBB® Dealer, offers T.M. COBB® Molded Doors across the West Los Angeles, Brentwood, Bel Air, Santa Monica, Malibu, Pacific Palisades, South Bay, Hermosa Beach, Manhattan Beach, Redondo Beach, Rancho Palos Verdes, Palos Verdes, Orange County, Laguna Beach, Irvine, Huntington Beach, Newport Beach and surrounding Southern California.
Westside Door Since 1971 is an Authorized T.M. COBB® Dealer in West Los Angeles. Serving Los Angeles County, Orange County, Riverside County, Inland County and and all of Southern California Area.
We Welcome Home Owners, Builders, Interior Designers, Architects and General Contracts Call us: (310) 478-0311 or Email at: customer.service@westsidedoor.com
T.M. COBB® Molded Doors Available at Westside Door – The Best Little Doorhouse In Town® Since 1971 – Call: 310-478-0311
T.M. COBB® Molded Doors are available at Westside Door, a T.M. COBB® Authorized Dealer serving West Los Angeles, Orange County, Southern California. Call us: (310) 478-0311
Get the door that endures with T.M. COBB® Molded Doors. From passage to bifold designs, your selection is wide open.
Specify the Door That Makes the Grade
- All doors are available primed and ready to paint.
- T.M. Cobb doors can be specified in 13/8˝ and 13/4˝ thicknesses.
- Most 13/4˝ thick T.M. Cobb doors can be manufactured to meet 20-, 45- and 60- minute fire ratings as per Warnock Hersey specifications.
Make a Solid Choice
- For the heft and sound-deadening properties of solid wood, specify solid core construction.
- Most T.M. Cobb doors can be specified for either hollow or solid core construction and with either finger-joint or MDF stiles and rails.
Tough on the Inside
- T.M. Cobb Molded doors featuring door facings by Jeld-Wen are made from an engineered wood fiber mat that is molded under
intense heat and pressure into an 1/8˝ (3.2mm) thick sheet of highdensity fiberboard. The result assures consistent quality from door to door, room to room, and home to home.
Environmentally Responsible
- Due to their physical composition, Jeld-Wen molded door facings are not subject to the California Air Resource Board’s Airborne Toxic Control Measure 93120 (ATCM). This measure enforces limits on formaldehyde emissions. If they were subject to the ATCM, Jeld-Wen door facings would meet the specification for the designation “ultra low formaldehyde emitter.” Jeld-Wen door facings have demonstrated formaldehyde emissions equivalent to wood through repeated testing by the Composite Panel Association (CPA), a third party certifier for the CARB ATCM rule.
- No old growth timber is harvested for the manufacture of Jeld-Wen designs. Instead, by-products from sawmill operations are used to convert wood chip waste into designs of true beauty.
- Jeld-Wen molded door facings contain a minimum of 63% by weight, pre-consumer recycled content. This is certified by Scientific Certification Systems, certificate number SCS-MC-01801.
- Jeld-Wen uses a low VOC primer, among the most environmentally friendly paint products on the market.
T.M. COBB® Molded Doors: Smooth or Textured in a Variety of Designs
Enhance interiors with T.M. COBB® by using doors as an integral part of interior design. Add style, elegance and decorating consistency to your projects.
Colonist®
- Pine wood grain texture or smooth finish.
- Distinguished by more than a quarter century of precision craftsmanship and design, this classic design rises above all imitators.
- Available in 6’8″, 7’0″ and 8’0″ passage and bifold sizes.
Madison®
- Smooth finish
- A square top single-panel plank door that brings character and charm to any room.
Carrara®
- Smooth finish
- Austere yet welcoming, this uncluttered design has limitless appeal.
- Available in 6’8″, 7’0″ and 8’0″ passage and bifold sizes.
Conmore®
- Elegant smooth finish.
- The only truly authentic molded, flat 5-panel door.
- Available in 6’8″ passage and bifold sizes.
Craftsman III™
- Smooth finish
- Created through advanced panel technology to produce the only truly authentic molded flat panel door.
- Reflects traditional Craftsman architecture and beautifully simplistic Mission-style with a modern design equally popular today.
- Available in 6’8″, 7’0″ passage sizes.
Continental®
- Smooth finish
- Squared and arched design gives a unique look with classic familiarity.
- Traditional style with proportioned panels.
- ADA Options available.
Santa Fe™
- Smooth finish
- An arch top, two-panel plank door that brings character and charm to any room.
- Available in 6’8″, 7’0″ and 8’0″ passage and bifold sizes.
Caiman®
- Smooth finish
- A two-panel true arch design that’s the picture of elegant simplicity.
- Available in 6’8″, 7’0″ and 8’0″ passage and bifold sizes.
Rockport™
- Smooth finish
- Smooth surface and modified cove and bead sticking profiles add traditional warmth to any room.
Princeton®
- Smooth finish
- Bold, sleek and stylish, this door brings chic to any room.
- Available in 6’8″, 7’0″ and 8’0″ passage and bifold sizes.
Monroe®
- Smooth finish
- Flat Panel design with a simplistic mission-style look.
- Available in 6’8″, 7’0″ and 8’0″.
- ADA Options available.
To learn more about T.M. COBB® products, you can reach out to Westside Door – your authorized T.M. COBB® Dealer in West Los Angeles, Southern California. Also serving Orange County, South Bay, Beverly Hills, Malibu, West Los Angeles and all of Southern California.
Westside Door – The Best Little Doorhouse In Town® Since 1971 – Southern California Authorized T.M. COBB® Dealer in West Los Angeles
We are located in West Los Angeles., on Sepulveda Blvd., between Pico and Olympic, one block east of the 405 Freeway.
We’ve been specializing in doors, windows, mouldings, skylights, and hardware since 1971.
Address:
Westside Door & Moulding
2326 South Sepulveda Blvd.
West Los Angeles, CA 90064
Monday–Friday 7:00am-4:00pm
Sales
Phone: (310) 478-0311
Fax: (310) 478-0314
